Télécharger Imprimer la page

Publicité

Liens rapides

Eisbecher DDC 250 mm
Anleitung
Schraubensatz -
4x
4x
M4x4
M4x8
ISO 7380
1
Beachten Sie die
Sicherheitshinweise.
2
Montieren Sie die
Pumpe mit den vier
M4x25 Schrauben.
Anschließend bringen
Sie die Standfüße mit
den vier M4x8
Schrauben an.
Eisbecher DDC 250 mm
Instruction manual
Screw set -
Jeu de vis
4x
4x
M4x8
M4x25
ISO
4762
Anleitung - Instruction manual - Instruction de service 1
4x
2x
M4
G ¼"
SW 2,5
Please note the safety
instructions.
Mount the pump with
the four M4x25
screws. Afterwards
you can install the
stands with the four
M4x8 screws.
Instructions de service
1x
2x
S'il vous plaît noter les
instructions de sécurité.
Monter la pompe avec
les quatre vis M4x25.
Puis vous installez les
pieds avec les quatre
vis M4x8.
2x

Publicité

loading

Sommaire des Matières pour Alphacool DDC 250 mm

  • Page 1 Eisbecher DDC 250 mm Anleitung - Instruction manual - Instruction de service 1 Eisbecher DDC 250 mm Anleitung Instruction manual Instructions de service Schraubensatz - Screw set - Jeu de vis M4x4 M4x8 M4x8 M4x25 G ¼“ SW 2,5 ISO 7380...
  • Page 2 Eisbecher DDC 250 mm Anleitung - Instruction manual - Instruction de service 2 mount Pour monter le Ausgleichsbehälter expansion tank, first reservoir d'expansion, befestigen, schrauben screw the brackets on d'abord visser les zunächst the mounting brackets supports, avec les Halterungen, mit den...
  • Page 3 Eisbecher DDC 250 mm Anleitung - Instruction manual - Instruction de service 3 Verschlauchen Sie den Tube the expansion Installez les tubes de Röhrenbehälter, wie an tank as decribed on the reservoir d'expansion Pumpenhalterung pump mount to achive comme décrit...

Ce manuel est également adapté pour:

15190