Details About The Icm Module; Declaration Of Conformity 4; Information Regarding The Documentation; Proper Use - Bosch ICM Notice D'installation

4 | Details about the ICM module

2 Details about the ICM module
2.1 Declaration of conformity
This device has been designed and tested to
comply with all applicable U.S. and
Canadian standards, rules and regulations.
The Certificate of Compliance is available
from the manufacturer or the certification
agency.
2.2 Information regarding the
documentation
NOTE:
B Hand all enclosed documents over to the
user.
We reserve the right to make technical modifications!
2.3

Proper use

The ICM modules are designed to control cascade
systems. A cascade system is a heating system where
several smaller boilers are connected in parallel to
achieve a higher output (
The ICM modules are only suitable for controlling boilers
with BUS-enabled Heatronic 3.
6 720 643 835 (2011/06)
fig. 6, page 10).
2.4

Scope of delivery

3x
2
Fig. 1 Scope of delivery
1 ICM
2 3 screws and 3 wall-anchors
3 4 strain relief clips and 8 screws
4 Installation and operating instructions
5 Conduit interface
B Check that the delivery is complete.
1
5
4x
3
4