Knick Protos 3400 Mode D'emploi page 30

Configuring the Module
Open parameter setting
Note: HOLD mode active
Menu Display
Menu selection
Return to meas
Parameter setting (Administrator)
System control
Module FRONT 3400-011
Module BASE 3400-021
Module PID 3400-121
Module PH 3400-035
Module CONDI 3400-051
Return
Module PID 3400-121 (Administrator)
Analog controller IV1/IV2
Digital controller KV1/KV2
Limit contact K9
Limit contact K10
Return
30
7.10 pH
25.0°C
Select: [enter]
Lingua
7.10 pH
25.0°C
7.10 pH
25.0°C
Block
Parameter setting
Open parameter setting
From the measuring mode:
Press menu key to select menu.
Select parameter setting using arrow
keys, press enter to confirm.
Passcode 1989 (To change passcode:
Parameter setting/System control/
Passcode entry).
HOLD
During parameter setting the analyzer
is in "HOLD" mode.
Current outputs and relay contacts
behave as configured.
Select "Module PID".
Press enter to confirm.
Select parameter using arrow keys,
confirm using enter.
PID 3400(X)-121