Connect A Source's Analog Port To The Soundbar - Bose II Serie Mode D'emploi

Connect a source's analog port to the soundbar

If your source doesn't have an optical or coaxial port and only has analog
ports (red and white), use a 3.5 mm to RCA stereo cable (not provided) to connect to
the soundbar.
1. If you haven't already, disconnect your TV from the soundbar.
2. Insert the RCA analog cable into the Audio OUT RCA (red and white) ports on
your source.
3. Insert the stereo plug into the soundbar's d port.
Soundbar port panel
Service
A LTER N AT E S ET U P
TV Input
AUX Optical Coaxial Power
3.5 mm to RCA
stereo cable
(not provided)
3 4
|
E N G
Audio OUT
Source port
panel
R
L