Bassinet Operation - UPPAbaby VISTA Mode D'emploi

BASSINET OPERATION

ATTACHING BASSINET TO STROLLER FRAME
To Attach Bassinet to Stroller Frame: Guide the
bassinet hubs over the posts on the stroller frame.
Push until you hear a "click" on both sides.
NOTE: Check that safety indicator is green to ensure
bassinet is properly installed.
CANOPY VENTILATION
STEP 1: Unzip the bottom zipper STEP 2: Lift and line up seam
on the canopy hood. half-way until magnets connect.
COLLAPSING BASSINET
STEP 1: Collapse bassinet canopy by simultaneously
pressing buttons on both sides and pushing back.
10
To Remove Bassinet from Stroller Frame: Slide plastic
button on carry handle in the direction indicated
and press down to release bassinet. Lift bassinet off
frame using carry handle.
For Additional Ventilation: Undo
Velcro ® flap found on bottom
exterior of bassinet and adhere to
lower Velcro strip.
STEP 2: Lift mattress out of the way. Disengage by
pulling steel braces from their respective sockets.
BASSINET OPERATION
PROPER USE OF ACCESSORIES
Using Bassinet Storage Bag: Slide collapsed bassinet
into bag and fasten Velcro ® tab.
REMOVING BASSINET FABRICS
STEP 1: Unzip canopy zippers STEP 2: Pull canopy support frame
located on the underside of canopy from hub on one side.
where fabric meets the carry handle.
Step 4: Slide fabric off canopy support frame.
Proper Use of Bassinet Bug Shield
STEP 3: Detach support frame from
rear clip.
To Remove Bassinet Fabric: Unzip liner from interior
bassinet frame.
11