Publicité
Intended use
This charger is only intended for the charging of
LI 7.2 V battery packs.
The product is only suitable for use inside, in dry
ambient conditions.
The user is responsible for damage result-
ing from improper use.
Device elements
Overview [fig. I]
1 Socket for mains cable plug
2 Charger
3 Red LED indicator
4 Green LED indicator
5 Charging slot
6 Battery
7 Battery release button
Technical data
Charger
Battery type
Input voltage
Output voltage
Output power
Battery capacity
Battery dimensions
(L x W x H):
Total charging time
Pre-charging current
Power consumption
Operating temperature 0°C - 50°C
10
Item 0864 905
Li-Ion
230 V / 50 - 60 Hz
8.4 V
2.0 A
2500 mAh
52.2 x 41.9 x 85.5 mm
Max. 2 hours
0.15 A to 0.25 A
Max. 17 W
Symbols
Carefully read through all safety precau-
tions and instructions.
WARNING
EC Conformity
Power tool of protection class II
Only for use inside.
Electrical equipment must not be dis-
posed of with normal domestic waste.
Please dispose of at an appropriate
disposal centre. Contact the local author-
ities or your dealer to obtain information
about disposal.
RCM Conformity
Charge the battery
DANGER!
Explosion hazard
¾ Do not use damaged, defective or
distorted batteries.
WARNING!
Risk of fire or property damage
¾ Remove the battery and unplug the
charger if you leave it unattended.
Before starting the device, check that mains
■
voltage and frequency correspond to the voltage
and frequency specified on the devices' type
plate.
Check seating of the battery in the device.
■
Plug in charger.
■
3 The LED indicator lights up red.
3 The device is ready for operation.
Fully insert the battery into the charging slot.
■
3 Once the battery is fully charged, the LED indica-
tor turns green.
Publicité
