Publicité
LED function
Status
Red LED Green LED
1 Open circuit
On
- input power
available
2 Battery is installed
On
and is charging
3 Battery is fully
Off
charged
4 Over-temperature
Flashing
protection
5 Overcharge time
Flashing
Cleaning and maintenance
Always remove the plug from the power source
■
and/or the battery from the device before
adjusting the settings, replacing accessories
or storing the device. Such preventative safety
measures reduce the risk that the device may be
inadvertently switched on.
Always ensure that the ventilation openings are
■
free from dirt.
Storage
Charge the battery before storage.
■
Charge the battery before long periods during
■
which it will not be used.
Store the battery separately from the charger, not
■
in the charger.
Store the battery in a cool dry place.
■
Accessories and spare parts
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Electrical power tools, accessories and packaging
should be sorted and submitted to an environmental-
Off
ly-sound recycling facility.
Off
On
Flashing
law, electrical devices that are no longer usable
must be collected separately and routed to an envi-
Flashing
ronmentally-friendly recycling/recovery chain.
Batteries:
Do not dispose of batteries in household waste,
do not expose to fire or water. Collect and recy-
cle batteries or dispose of with due care for the
environment.
EU countries only:
In accordance with Directive
2013/56/EU defective or worn-out batteries must
be recycled.
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Disposal
EU countries only:
Do not dispose of your electrical
power tool in household waste.
In accordance with the European
Directive 2002/96/EU on Waste
Electrical and Electronic equipment
and its implementation into national
Warranty
11
Publicité
