Connecting The Line Outputs - Renkforce AN-8006 Notice D'emploi

Connecting the LINE outputs

The CD tuner has four LINE outputs for connecting power amplifiers.
For the connection of the cinch sockets only use the shielded cinch wires. The use of other
cables might cause interferences.
Keep the distance of the cables as short as possible.
Do not place the cables near other cables to avoid interferences in the cables.
To avoid distortions or mismatching that could damage the unit or the power amplifiers, the
cinch connector must only be connected to devices with the suitable cinch terminals. For this,
observe also the connection data in the section "Technical Data".
• Connect the sockets OUT FL and FR with the inputs of the power amplifier for the front loudspeakers.
• Connect the sockets OUT RL and RR with the inputs of the power amplifier for the rear loudspeakers.

The red socket is a terminal for the right channel
The white socket is a terminal for the left channel
60
Operating instructions

English