Audio Streaming - Renkforce AN-8006 Notice D'emploi

Masquer les pouces Voir aussi pour AN-8006:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dialling from the phone number memory
Select PRE NUM.
Press the volume control / dial control (2).
Select the desired number by turning the button volume control/dial control (2).
Press the
/ MODE button (6).
The connection is established.
Dialling from the menu:
While a number is shown on the display (from the menu PRE NUM, RECEIVED, DIALED or MISSED), this
number can be dialled directly by pressing the button
Switching between automatic and manual call accept:
Select AUTO ANS or MANU ANS by turning the button volume control/dial control (2).
AUTO ANS:
The hands-free equipment establishes the connection to the incoming call automatically.
MANU ANS: The connection to an incoming call must be established manually with the button

Audio streaming

Audio streaming is the transmission of audio data (music) via Bluetooth®, e.g. from a mobile phone to the CD tuner.
If you own a A2DP-capable Bluetooth® device, you can connect it with the CD tuner via the pairing procedure as
described further up in this manual and establish an audio transmission.
Make sure that both devices were connected via pairing.
Start playback/audio transmission on your Bluetooth® device (see the corresponding operating manual).
Press the button
Now audio transmission is activated.
You can now remote-control the playback of your Bluetooth® device with the buttons
1 /
|| (12) as usual.
/ MODE (6), until BT AUDIO is displayed on the display (5).
/ MODE (6).
/ MODE (6).
/ * (8),
/ # (9) and
79

Publicité

Table des Matières
loading

Table des Matières