Urmet 2VOICE 1783/1 Mode D'emploi page 6

ENGLISH
The video door unit is dedicated to 2Voice system. It is designed on Mikra style and is equipped with 2 call
buttons. Can be used in single or two-family systems (Kit), or as secondary call station.
4 A
4 B
Ø6mm
PANEL INSTALLATION
• Install the module at the height shown.
• Set the dip-switches.
• Connect the wires to the terminal strip.
• Fit the name tag on the extractable front panel (C1 for single-family systems or C2 for two-family
systems).
• Adjust volume.
• Close the push-button panel with the metal cover.
1 2
E
D
4
10
1 C1 1 D
1 C2 1 E
B
3
A
5
The audio levels are trimmed in factory,
so they don't need to be changed in most
installations.
If it is necessary to change them, use a
screwdriver on the suitable adjusting points.
7
For recessed installation of the push-button panel, the Ref. 1122/60 embedding box must be
purchased separately.
DESCRIPTION OF TERMINALS
]
SP Open door detector
]
PA Hall button
]
SE2 Driveway electric lock activation
SE- Negative for pedestrian crossing electric lock
SE+ Positive for pedestrian crossing electric lock
]
LINE Bus line in
DS1783-005 DS1783-005
C1
User 1
C2
User 0
6
8
E
D
11