ALFRA TML 400R Mode D'emploi page 19

Never lift round pipes laterally. The workpiece could slip abruptly off the groove and disengage
itself from the lifting magnet. Danger of injury!
8. If the magnetic adhesion is sufficient and there is no deformation, you can continue the lift.
9. Be sure to move your load slowly and smoothly. Avoid swinging, jarring or quick and abrupt rotations.
Especially round workpieces could disengage from the groove and immediately reduce the load-bearing
capacity.
10. After the load has been set down completely and safely, you can deactivate the lifting magnet. To do this,
press the safety tab using the heel of your hand and move the lever upwards into the OFF position.
19