Changing The Batteries; Technical Data - Seca 703 Mode D'emploi Et Garantie

8. Servicing
Your seca scale leaves the factory with an accuracy greater than ±0.15 %. To ensure that
this accuracy is maintained, the product must be carefully set up and regularly maintained.
Depending on the frequency of use, we recommend servicing every 3 to 5 years. Please
ensure that a qualified service agent is used. If in doubt, contact seca Customer Service for
further information.

Changing the batteries

bAtt
When or
6 type AA 1.5 V batteries.
– Push the battery compartment closure
towards "Battery" and open the cover.
– Take out the holder and batteries.
– Remove the used batteries and insert
new batteries in the holder.
Check that the polarity is correct.
– Place the holder and batteries in the
battery compartment.
– Close the cover.

9. Technical data

Maximum load
Graduations
0 up to 250 kg:
up to 550 lbs:
Dimensions scale
width:
height:
depth:
Dimensions weighing platform
width:
height:
depth:
Height of figures
Weight
Temperature range
Batteries
Power supply
Power consumption
Model 703
appear in the display, you should change the batteries. You need
250 kg / 550 lbs / 39 sts
0.1 kg
0.2 lbs
360 mm / 14.2 ins
930 mm / 36.6 ins
520 mm / 20.5 ins
350 mm / 13.8 ins
84 mm / 3.3 ins
360 mm / 14.2 ins
20 mm
approx. 16 kg
+10 °C to +40 °C
6 type AA 1.5 V batteries
Battery/
mains unit (option)
approx. 25 mA
GB
23