bredent thermopress 400 Mode D'emploi page 16

7. Cleaning
When using heated cleaning devices (ultrasonic), make sure not to exceed a temperature of 50 °C for the cleaning
liquid. Do not use any cleaning agents that contain alcohol or acids.
8. Symbols
8.1 Symbols according to DIN EN ISO 15223-1
Reference numer
Lot number
Qty Quantity
Dry storage
Attention
Manufacturer
8.2 Symbols according to NFPA (USA)
HEALTH
1
FIRE
1 0
REACTIVITY
8.3 Other symbols
Preheating temperature
Preheating time
Injection speed
Injection force
9. Additional information
These instructions for use are based on state-of-the-art methods and equipment and our own experience. The
product may only be used by dentists, dental technicians and adequately trained dental staff and is intended for
the indication described under item 2. The processing parameters described under item 6 must be strictly adhered
to in order to avoid material degradation and the possibility of chipping or fracture of the completed restorations.
The user himself is responsible for processing the product. Liability for incorrect results shall be excluded since the
manufacturer does not have any influence on further processing. Any occurring claims for damages may only be
made up to the value of our products. If components of other systems are used, all claims for warranty or compen-
sation are excluded!
16
1
1
Hazard diamond
0
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany ·
T: +49 7309 872-22 · F: +49 7309 872-24 · www.bredent.com · @: info@bredent.com