bredent thermopress 400 Mode D'emploi page 11

General information on proper preparation of acrylic teeth to be anchored in thermoplastic materials
Measures
link IC
*Chemical bond
between den-
ture tooth and
base material
Increase of
microretentive
abonding
to the base
materal
mechanical
retentions
required
* No chemical bond of base material to base material (rebasing)!
** To achieve red-white esthetics with crea.lign, it is sufficient to sandblast with 110 µm and condition with
visio.link (visio.lign system) on the Polyan IC base material.
3. Dental-technical contraindications
Polyan IC
Bio Dentaplast
bre.flex / bre.flex 2
nd
bre.dentan HP
Bio XS
The products must not be used for patients with a suspected allergy until allergy tests have been completed to confirm
that the patient is not allergic to the materials contained in the product.
Material samples for allergy sufferers
Material sample
Polyan IC
Polyan IC
Polyan IC
** Polyan IC bre.dentan
poly. visio.
link
-

-

 
Retention elements such as retainers, attachments, telescopes, crowns
and bridges
Crowns and bridges (fixed)
edition Crowns and bridges
Retention elements such as retainers, attahments, telescopes
Implants
REF
99250PIC crystal-clear
99250PI2 pink 2
99250PI4 pink veined
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany ·
T: +49 7309 872-22 · F: +49 7309 872-24 · www.bredent.com · @: info@bredent.com
bre.flex
HP
visio.link visio.
link
- -
- -
 
Color
1 piece
1 piece
1 piece
bre.flex Bio Denta-
2 edition plast
nd
visio.link visio.link
- -
-

 
Qty
PMMA
PMMA
PMMA
BioXS
visio.
link
-


Type
11