Publicité
Les langues disponibles
Les langues disponibles
1. Press the Mode button until the temperature icon blinks .
2. Use the + and - button to set the desired temperature,from 13 to30℃.
3. The temperature icon will stop blinking and the current room temperature
will appear after the desired temperature is set.
4. The heat will turn-off shortly after the desired temperature is reached and
the temperature display will blink.
5. The heater will turn back on when the room temperature drops below the
desired temperature . the temperature display will then stop blinking and will
display the current room temperature.
SET TIMER (AUTO-OFF)
NOTE: This function should only be set if you desire that the heater be
automatically shut off after a certain period of time(1 to 24 hours from the time
the function is set)
NOTE: Always set the desired temperature prior to setting the Timer(see
step2) so that the heater will shut off at the desired temperature setting.
6. Press the Mode button until the timer icon blinks. The hour display will
appear . The Auto Off icon will also appear.
7. Use the + and - buttons to set the heater operation time between 1 and 24
hours. This function will activate once the timer icon stops blinking.
8. The heater will automatically turn-off when time runs out.
NOTE :If the desired temperature was set prior to setting the timer function ,
the heater will cycle on and off as per the selected desired temperature
setting and will discontinue operation once the programmed timer setting has
been reached(default is 10 hours).
SET TIMER (AUTO-ON)
NOTE: This function provides a delayed start option and should only be set if
you desire that the heater be automatically turned ON after a certain period of
time (1 to 24 hours from the time the function is set).
NOTE: Always set the desired temperature prior to setting the timer (see
step2)so that the heater will turn on at the desired temperature setting.
1. Press the Mode button until the timer icon blinks. The hour display will
appear .The Auto On icon will also appear.
2. Use the + and - buttons to set the heater start time between 1 and 24 hours.
This function will activate once the timer icon stops blinking.
3. The heater will automatically turn on when time expires.
NOTE: If the desired temperature was set prior to setting the timer function,
the heater will cycle on and off as per the selected desired temperature
setting once the heater begins to operate.
NOTE: When using the Auto-On function the heater will turn on after the set
time has elapsed. If the Auto-Off function has not been set , a default timer of
29
Publicité
