STEP 2
Connect the two cables and t the computer support with the cover (35) to the main frame using the screws (60)
and washers (25 & 30) as shown. Make sure that no cable is trapped.
Then x the bottle holder (92) with 2 screws M5 × 16 (10).
25
SET UP INSTRUCTIONS
10 Screw M5×14 (2 pcs.)
25 Curved washer ø8 (4 pcs.)
30 Spring washer ø8 (4 pcs.)
60 Screw M8×20 (4 pcs.)
104 Allen key