MAXXMEE HIC-AF-8024LD Mode D'emploi page 17

Hot Air Frying Machine
stored away. Use oven gloves when handling the hot acces-
sories.
Never immerse the main unit and the connecting cable in wa-
■
ter or other liquids, and ensure that these components cannot
fall into water or become wet. There is a danger of electric
shock!
Do not pour any liquids (e.g. oil or water) directly into the
■
device or the drawer or place a liquid-fi lled vessel into the
device. It works exclusively with hot air.
The device must always be disconnected from the mains pow-
■
er when it is left unattended and before transporting or clean-
ing the device.
Do not make any modifi cations to the device. Also do not
■
replace the connecting cable yourself. If the device, the con-
necting cable or the accessories of the device are damaged,
they must be replaced by the manufacturer, customer service
department or a specialist workshop in order to avoid any
hazards.
The device is not designed to be operated with an external
■
timer or a separate remote control system.
Follow the instructions in the "Cleaning and Storage" chapter!
■
DANGER – Danger of Electric
Shock
■
Use and store the device only in
closed rooms.
■
Do not use the device in rooms with
high humidity.
■
Should the main unit fall into water,
switch off the power supply imme-
diately. Do not attempt to pull the
device out of the water while it is
connected to the mains power! Have
the device checked by a specialist
workshop before putting it back into
operation.
■
Never touch the main unit and the
connecting cable with wet hands
when the device is connected to the
mains power.
WARNING – Danger of Fire
■
Do not operate the device in the
vicinity of combustible material. Do
not place any combustible materials
(e.g. cardboard, paper, plastic) on or
in the device.
■
Do not connect the device along with
other consumers (with a high wattage)
to a multiple socket in order to pre-
vent overloading and a possible short
circuit (fi re).
■
Do not use any extension cables.
■
Do not cover the device during
operation in order to prevent it from
catching fi re. Do not insert anything
EN
17