Intended Use; Scope Of Delivery - Renkforce SB-E17 Notice D'emploi

3. Intended Use

The parking system in the license plate holder serves to display obstacles at a distance of up to 2 m (e.g.
when parking) when reversing a motor vehicle. It works with ultrasound sensors for distance recording.
The distance from potential obstacles is displayed acoustically and visually on a display unit. The distance
and position of the obstacle can be recognised easily by this.
This product is only approved for connection to a 12 V/DC board mains (with the car battery's minus pole
at the car body). It must only be installed and used in vehicles with this board voltage type. The electrical
connection must be made by a specialist.
The user must ensure performance of the installation in a manner that protects the electronic unit and dis-
play units from moisture and wetness. The ultrasound sensors are water-tight and suitable for installation
on the outside of the vehicle.
Therefore, read these operating instructions completely and attentively first before installing and commis-
sioning the product! Observe all safety and assembly notes!
Any use other than that described above can damage the product and may involve additional risks such as
short circuit, fire, electric shock, etc. No part of this product must be modified or converted!

4. Scope of Delivery

• License plate holder with 3 sensors and connection cable
• Display unit
• Electronic unit
• Cable for the voltage supply
• Mounting and installation material
• Operating instructions
21