Omron Walking style Pro Mode D'emploi page 7

Walking Style Pro.book Page 5 Friday, December 15, 2006 11:48 AM
4 Settings
4.1 Control functions
J Display
K Set button [SET]
L Mode/Event button [MODE/EVENT]
▲ ▲
M Memory/ button [MEMO/ ]
N USB cable connection port
P System reset button
4.2 Determine your stride length
Measure your stride length first for accurate measurement.
How to measure your stride length?
Correct stride length is from a tip of your foot to another one.
To measure the correct average stride length, divide the total
length of ten steps you walked by the number of steps (10).
Calculate the stride length as shown in the following formula:
Example: When you walk 5.5 meters, 5.5 m (total length) / 10
(number of steps) = 0.55 m (55 cm)
4.3 Set time, weight and stride length
Setting time, weight and stride length is necessary to record the number of steps and then to
calculate the consumed calories, burned fat volume and walking distance.
Notes:
▲
• Keep pressing Memory/ button to go fast forward with 1 hour, 10 minutes, 10 kg or 10 cm
intervals.
• If you leave time setting for 5 minutes, the display will return to the number of steps.
• Use the black circled button, indicated on the drawing, to perform the operation.
1 Place battery, replace battery or press Set button for two seconds.
Note: Refer to 3.1 or 3.2.
▲
2 Press Memory/ button to set the
hour.
3 Press Set button.
▲
4 Press Memory/ button to set the
minute.
5 Press Set button to set the time and
to proceed to weight setting.
Note: The initial weight is 30 kg.
▲
6 Press Memory/ button to set your
weight.
Note: If the display reaches 136 kg,
it will return to 30 kg.
7 Press Set button to fix the weight
and to proceed to stride length set-
ting.
Note: The initial stride length is
40 cm.
J
K
M
L
10
3
1 2
4 5
7 8
N
P
2
1
5.5 m
EN
3
6
9
5