Table Des Matières; Contents; Foreword; Symbols - Dolmar BC-CS Instructions D'emploi D'origine

English

Contents

Contents .......................................................................................... 6
Foreword ......................................................................................... 6
Symbols .......................................................................................... 6
Approved power unit........................................................................ 7
Part description................................................................................ 7
Safety precautions ........................................................................... 7
Assembly and adjustment ............................................................... 8
Operation ......................................................................................... 9
Inspection and maintenance.......................................................... 10
Storage .......................................................................................... 10
Maintenance schedule....................................................................11
Troubleshooting ..............................................................................11
Technical Data ................................................................................11
EC Declaration of Conformity ........................................................ 12

Foreword

Thank you very much for purchasing Dolmar brushcutter
attachment. This attachment is designed to be mounted on Dolmar
power unit mentioned in this instruction manual.
Before use, please read this booklet and the instruction manual of
the power unit. They will assist you to obtain the best possible result
from your Dolmar brushcutter attachment.
(Original instructions)

Symbols

Page
The following symbols are used on the attachment and this
instruction manual. Understand these definitions.
6
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
Keep bystanders away.
Keep distance at least 15 m.
Avoid kickback.
Wear a helmet, goggles and ear
protection.
Wear protective gloves.
Wear sturdy boots with nonslip
soles. Steeltoed safety boots are
recommended.
Top permissible tool speed.
Forbidden!
First Aid
(For European countries only) This
product complies with EC directives.