Amprobe TMA-21HW Mode D'emploi page 11

16
READ key :
• In the setting mode, push this key and move flashing cursor to the right.
• Push this key to enter the data memory READ mode; push this key for 2
seconds to exit this mode.
17
Sensor protection tube.
Description of Display
FLOW SET UP
DISPLAY
Air Velocity Display :
: Auto power off indication.
H : Data hold indication.
SET : Setting mode indication.
REC : Record mode and current air velocity measured display indication.
REC MAX : Maximum air velocity measured display indication.
REC MIN : Minimum air velocity measured display indication.
REC AVG : Average air velocity measured display indication.
(The average of the last 30 samples)
AIR VELOCITY &
HUMIDITY DISPLAY
MEMORY DISPLAY
6
TEMPERATURE &
AIR FLOW
DISPLAY