Cleaning And Disinfecting Instructions - NDS ZEROWIRE G2 Mode D'emploi

Radiance Ultra 32" 4K, 4X SDI
Radiance Ultra 32" 4K, 12G SDI / 2D
6.5

Cleaning and Disinfecting Instructions

CAUTION!
Prior to cleaning and surface disinfection, the unit should be turned OFF and disconnected
from its power source.
Do not allow liquids to enter the interior of the unit.
Do not permit exterior surfaces to come into contact with unacceptable solvents such as
those listed below.
Severe damage to the unit may result.
Cleaning the device
Thoroughly wipe all exterior surfaces with a lint-free cloth that has been dampened with an acceptable clean-
ing agent. Acceptable cleaning materials are listed below.
Remove residual detergent by wiping all exterior surfaces with a lint-free cloth dampened with distilled water.
Disinfecting the device
Disinfect the unit by wiping all exterior surfaces with a lint-free cloth dampened with 80 % Ethyl Alcohol. Allow
the unit to air dry.
Acceptable cleaning materials:
• Vinegar (distilled white vinegar, 5 % acidity)
• Ammonia-based glass cleaner
Acceptable disinfecting material:
• Ethanol 80 % by volume
Note: The acceptable cleaning and disinfecting materials listed above have been tested on NDS products and,
when used as directed, do not harm the product's finish and or its plastic components.
90R0116
90Z0162
90R0123
90Z0163
Specifications | 33
en