Anthem Room Correction; Power Settings - Paradigm PREMIUM WIRELESS Serie Manuel D'utilisation

pressing the enter button and the soundbar will
respond with 'Saved'.
HDMI > Lip Sync: Enter the submenu by pressing
the enter button. Here you may adjust the audio/
video sync for the HDMI inputs. Adjust this setting
if the timing of the audio content does not match
the video content.
HDMI > Lip Sync > HDMI ARC or HDMI 1 or
HDMI 2 or HDMI 3: Enter the submenu by press-
ing the enter button. Here you choose which input
you are adjusting lip sync for.
HDMI > Lip Sync > HDMI ARC or HDMI 1 or HDMI 2
or HDMI 3 > 0ms to 300ms: Using the up/down
directional buttons, choose the desired delay (from
0 milliseconds to 300 milliseconds). Adjust this
setting until the audio and video from your HDMI
sources are synchronized. If your audio and video
from HDMI sources is already synchronized, leave
this set to 0ms. Lip sync will be automatically set
to match the value currently displayed.
MENU: ANTHEM ROOM CORRECTION
Anthem Room Correction: Enter the submenu
by pressing the enter button. Here you may
turn Anthem Room Correction on and off. Using
proprietary processes, a microphone, and the
power of your PC, the ARC system analyzes
your soundbar's in-room sound, then computes
the required correction to yield optimal perfor-
mance within your acoustic environment.
Anthem Room Correction > Off or On: This option
turns the Anthem Room Correction feature on or
off. Activate by pressing the enter button and the
soundbar will respond with 'Saved'. Please note,
turning ARC on and off only makes a difference
if ARC corrections have not been loaded on the
soundbar.
25
MENU OPTION: POWER SETTINGS
Power Settings: Enter the submenu by pressing the
enter button. Here you may adjust the soundbar's
power options.
Power Settings > Power Standby: Enter the sub-
menu by pressing the enter button. Here you choose
whether the subwoofer is always on or turns itself on
and off automatically.
Power Settings > Power Standby > Auto Standby
(Default): This option configures the soundbar to turn
itself off after no audio signal is detected for approxi-
mately 20 minutes. When the soundbar detects an
audio signal, it will immediately turn itself on. Activate
by pressing the enter button and the soundbar will
respond with 'Saved'. Please note: When set to Auto
Standby, if the soundbar is manually turned off (using
the power button on the control panel or remote
control), the soundbar will not respond to an incoming
audio signal and will not turn on automatically. In this
situation, turn the soundbar on using the power button
on the control panel or remote control and the sound-
bar will resume automatic power handling.
Power Settings > Power Standby > Always On: This
option configures the soundbar to remain on at all
times until it is manually turned off using the power
button on the control panel or remote control. Activate
by pressing the enter button and the soundbar will
respond with 'Saved'.
Power Settings > Power-On Volume: Enter the
submenu by pressing the enter button. Here you can
configure the default volume of the soundbar when it
powers on or comes out of standby.
Power Settings > Power-On Volume > Set: Enter
the submenu by pressing the enter button. Here you
choose set the power-on volume.
Power Settings > Power-On Volume > Set > –90dB to
+10dB: Using the up/down directional buttons, choose
the desired volume level. Once set the soundbar will