Connection; Power Connection - Paradigm PREMIUM WIRELESS Serie Manuel D'utilisation

Fig. 3

CONNECTION

Turn your soundbar off before
making or breaking any signal
connections! WARNING! The
power cord should not be installed,
removed, or left detached from the soundbar
while the other end is connected to an AC
power source.

POWER CONNECTION

The power cord should be firmly inserted into
the AC power receptacle on the rear connection
panel of the soundbar, then to any convenient
AC wall outlet. The soundbar also integrates a
signal sensing power supply that automatically
switches into standby mode after sensing no
audio signal for approximately 20 minutes (this
will only occur when the menu's power setting
is set to 'Auto Standby').
M6
7mm
Fig. 4
3.2
2mm
13.7mm
10