Surrounds - Paradigm PREMIUM WIRELESS Serie Manuel D'utilisation

Reference your subwoofer's manual to learn
how to properly adjust the sub's level and phase
controls to achieve proper blending with the
soundbar. The subwoofer's crossover should be
set to "bypass" or "LFE". For subwoofers that do
not have a "bypass" or "LFE" crossover setting,
we recommend adjusting the crossover to its
highest setting.
Subwoofer > Wireless Sub: Enter the submenu
by pressing the enter button. Here you can sync
the soundbar to the subwoofer wireless receiver
(included with your soundbar).
Reference your subwoofer's manual to learn
how to properly adjust the sub's level and phase
controls to achieve proper blending with the
soundbar. The subwoofer's crossover should be
set to "bypass" or "LFE". For subwoofers that do
not have a "bypass" or "LFE" crossover setting,
we recommend adjusting the crossover to its
highest setting.
Subwoofer > Wireless Subwoofer > Sync
Subwoofer: This option connects the soundbar
to the Subwoofer Wireless Receiver. Start sync-
ing by pressing the Enter button. The soundbar
will display 'Push and Hold Button'.Press and
hold the subwoofer wireless receiver's sync but-
ton. Connection is successful when the status
light turns solid and the soundbar responds with
'Synced'.
Subwoofer > Wireless Sub > Turn Wireless Sub
Off: This option configures the soundbar to han-
dle all bass information and, when selected, will
not output information via the wired or wireless
subwoofer connections. Activate by pressing the
enter button and the soundbar will respond with
'Off'. Activating this option performs the same
function as 'Subwoofer > No Sub'.
MENU OPTION: BASS LEVEL
Bass Level: Enter the submenu by pressing the
enter button. Here you can configure bass output
by ±10dB in increments of 2dB.
Bass Level > –10dB to +10dB: Using the up/down
directional buttons, choose the desired bass level
(from –10dB to +10dB). Bass level output will be
automatically set to match the value currently dis-
played.
MENU OPTION: SURROUNDS
Surrounds: Enter the submenu by pressing
the enter button. This menu allows you to turn
simulated surround channels on or off when the
soundbar detects a multi-channel source.
Surrounds > Off: This option configures the sound-
bar (when it detects 5.1-channel encoded content)
to down-mix to 3.1-channel output (left/center/right
channels + subwoofer) and does not utilize simulated
surround channels. All content originally intended for
the surround channels is routed to the left/center/
right channels. Activate by pressing the enter button
and the soundbar will respond with 'Saved'.
Surrounds > On (Default): This option config-
ures the soundbar (when it detects 5.1-channel
encoded content) to fully reproduce all 5.1-chan-
nels of information including simulated surround
channels. Activate by pressing the enter button
and the soundbar will respond with 'Saved'.
Surrounds > +6dB: This option configures the
soundbar (when it detects 5.1-channel encoded
content) to fully reproduce all 5.1-channels
of information including simulated surround
channels with 6dB of extra output. Activate by
pressing the enter button and the soundbar will
respond with 'Saved'.
22