Publicité
Les langues disponibles
Les langues disponibles
TS 4000 R IS
Push back bowden cable into frame and screw home releasemechanism (8).
X
While the 2nd closing leaf is closed, turn screw (1.) until marking on the closer and slide plate (9) are in
X
matching position.
Screw distance piece (10) to door leaf (2nd closing leaf). Urgently use shim (11) to ensure a gap of max. 1 mm.
X
6.4
Mount linkage
Position rod and screw (tightening torque: 14 Nm, closing angle approx 80°) (1.).
X
Screw lower part of rod assembly (tightening torque: 14 Nm) (2.).
X
Mount rods also on the inactive wing likewise.
X
latching action setting
with latching action
Mounting and securing
without latching action
Fig.: 6.3.2
Fig.: 6.3.3
Fig.: 6.4.1
Fig.: 6.4.2
GB 5
Publicité
