Dell PowerConnect W-650 Mode D'emploi page 14

Figure 6
4. Mount the controller within your organization's rack system using four 12-24 x 5/8" phillips head screws and
suitable screwdriver (see
Figure 7
5. Leave a minimum of four inches (10cm) of space on the left and right side of the unit for proper air flow and
ventilation (see
6. Leave additional space in front and back of the unit to access power cords, network cables, and LED status
indicators (see
14 | W-650 Series Installation
Rack Mount Brackets
6-32 x 1/4" Phillips Flat Head Screws
(6x, 2x per bracket)
Figure
Rack Mount Installation
Figure 8).
Figure 8).
7).
Rack Mount Bracket (2x)
Standard 19-inch
Rack System
12-24 x 5/8"
Phillips Flat Head Screws
(4x, 2x per bracket)
Dell PowerConnect W-650 Controller | Installation Guide