Belkin F5D8633-4 Manuel De L'utilisateur page 54

Using the Web-Based Advanced User Interface
Setting WPA-PSK
1.
From the "Security Mode" drop-down menu, select "WPA-PSK (no
server)".
2.
For "Encryption Technique", select "TKIP" or "AES". This setting
will have to be identical on the clients that you set up.
3.
Enter your pre-shared key. This can be from eight to 39
characters and can be letters, numbers, or symbols. This same
key must be used on all of the clients that you set up.
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings.
52 52