Belkin F5D8633-4 Manuel De L'utilisateur page 42

Alternate Setup Method
Setting your Connection Type to Modem Only (Disable
Internet Sharing)
In this mode, the Router simply acts as a bridge passing packets
across the DSL port. It requires additional software to be installed on
your computers in order to access the Internet.
1. Enable Bridge Service
2. VPI/VCI
- Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameters here. (Assigned by your ISP).
3. Encapsulation
Click "Apply Changes" to save and activate your settings. To go
back to the original settings before saving, click "Clear Changes".
Or click any of the Quick-Navigation links for other options. Your
new settings will not be saved unless your click "Apply Changes".
(2)
(3)
- Check this box to enable bridge service
- Select the LLC or VC MUX your ISP uses.
40 40