Belkin F5D8633-4 Manuel De L'utilisateur page 52

Using the Web-Based Advanced User Interface
Setting WPA/WPA2-Personal (PSK)
Like WPA security, WPA2 is available in both WPA2-Personal (PSK)
mode and WPA2-Enterprise (RADIUS) mode. Typically, WPA2-
Personal (PSK) is the mode that will be used in a home environment,
while WPA2-Enterprise (RADIUS) is implemented in a business
environment where an external radius server distributes the network
key to the clients automatically. This guide will focus on WPA2-
Personal (PSK) usage. Please refer to the User Manual for more
information about wireless security and different types of wireless
security.
1.
After you've set up your Router, go to the "Security" page under
"Wireless" and select "WPA/WPA2-Personal (PSK)" from the
"Security Mode" drop-down menu.
2.
For "Authentication", select "WPA-PSK", "WPA2-PSK", or "WPA-
PSK + WPA2-PSK". This setting will have to be identical on the
wireless clients that you set up. "WPA-PSK + WPA2-PSK" mode
will allow the Router to support clients running either WPA or
WPA2 security.
3.
"Encryption Technique", select "TKIP", "AES", or "TKIP+AES".
This setting will have to be identical on the wireless clients that
you set up.
4.
Enter your pre-shared key (PSK). This can be from eight to 63
characters and can be letters, numbers, or symbols. This same
key must be used on all of the wireless clients that you set up.
For example, your PSK might be something like: "Smith family
network key". Click "Apply Changes" to finish. You must now set
all wireless clients to match these settings.
50 50