Belkin F5D8633-4 Manuel De L'utilisateur page 82

Manually Configuring Network Settings
Manually Configuring Network Settings in Windows 2000, NT, or XP
1.
Click "Start", "Settings", then "Control Panel".
2.
Double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP).
3.
Right-click on the "Local Area Connection" associated with your
network adapter and select "Properties" from the drop-down
menu.
4.
In the "Local Area Connection Properties" window, click "Internet
Protocol (TCP/IP)" and click the "Properties" button. The
following screen will appear:
(1)
(2)
(3)
5.
If "Use the following IP address"
will need to be set up for a static IP connection type. Write the
address information the table below. You will need to enter this
information into the Router.
6.
If not already selected, select "Obtain an IP address
automatically"
(3)
. Click "OK".
Your network settings are now configured for use with the Router.
(1)
and "Obtain DNS server address automatically"
(2)
is selected, your Router
80 80