Publicité
Les langues disponibles
Les langues disponibles
9.
Replace the 30-ampere fuse no. 35 of the fuse box (in the central electronics) with the supplied 10-ampere-fuse.
10.
Plug the supplied module into the 14-pole socket of the cable set and attach the assembly to the car body at a
suitable spot using the M5x10 screw. Take special care that moisture cannot penetrate the module (danger of
short-circuits).
Trailer indicator defect is signalled by a control light of the vehicle by increased flashing frequency!!
Trailer power supply:
3-pin connector housing (red/blue, yellow, and white/brown cables) is provided for expanded socket functions. Put
this part of cable set behind the trim. To expand socket functions it is necessary to order the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Assembly instruction for the customer.
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
Remarks regarding trailer indicator operation:
part no. :<59907995
part no. :<5996995
Publicité
