Lifting Onto The Roof; Installation Of Collectors Next To Each Other - Stiebel Eltron SOL 23 Premium Utilisation Et Installation

.CZ`<<`.HC
.CZ`<<`.HC

10.2 Lifting onto the roof

Damage to the appliance and environment
If there is strong sunlight, the collectors should be cov-
ered with opaque material before commissioning.
You can pull the collector onto the roof over a ladder. To do this,
place a rope around the collector frame.
Do not secure the rope to the collector connections.
2
1
1 Rope
2 Collector
qqq Z`. <é<`VHC HB

10.3 Installation of collectors next to each other

(installation height up to 20 m on tiled roof)
10.3.1 Overview
Both illustrations below provide an preliminary overview of the
installed position after installation.
Cross-section through the finished installation, bottom
1
2
3
1 Additional roof battens
2 Batten on edge
3 Piece of lead flashing
4 Mounting bracket
5 Collector
Cross-section through the finished installation, top
3
1 Tile lifter
2 Additional roof batten
3 Collector
4 Hydraulic connection line
5 Sealing strip
5
4
2
5
4
2
ZH<
1
1
TVB.eB ’