Safety Notice; Initial Set Up - Skywalk CULT S Manuel D'utilisation

4 SAFETY NOTICE

With the purchase of this equipment, you assume the full responsibility and accept all
risks associated with the use of paragliding equipment, including injury and death. Impro-
per use of paragliding equipment increases this risk. To fly a paraglider, you must be in
possession of the required license or permit for the country in which you are flying.
Neither skywalk nor the seller nor the importer of this product can be made liable in case
of personal injury or damage caused to a third party.

5 INITIAL SET UP

The CULT should initially be set up and in-
spected together with your dealer. In parti-
cular, a compatibility test must be carried
out when the reserve chute is installed for
the first time. Then perform the basic set
up yourself while sitting in a harness simu-
lator. Insert the main carabiners through
the two loops that are connected direct-
ly to the seat and the back support. At the
front of the seat are metals ring on the left
and right that are used as guides for the
speed system. When installing the speed
bar for the first time, first feed the lines
through the metal ring (1), then through
the ball-bearing pulley (2) and final-
ly through the metal loop (3) of the retrac-
tor system. This also prevents the brummel
hook from disappearing inside the harness
and distracting you during your launch pre-
paration. Finally, the speed bar line is fixed
with a bowline knot to the brummel hook
and the speed system is ready for use.
47 Safety Notice & Initial Set Up
1
3
EN
2
Initial Set Up 48