Publicité
Les langues disponibles
Les langues disponibles
Audi A3 + S3 Quattro - VW Golf 4-motion
1999 - ....
Ref. 1225
Fitting instructions
1)
Remove the rear bumper. Permanently remove buffer beam against the rear of the body work.
2)
Now place the tow bar with the supporting arms in the freed openings at the back of the vehicle. Points
(A) of the tow bar match the provided drillings in the outside of the chassis beam, those drillings are
sealed with adhesive tape which has to be removed.
Insert bolts and washers through the outside of the chassis beam and tighten everything firmly.
3)
Replace the bumper.
4)
Assemble (*) and fasten firmly.
Composition
1 tow bar reference 1225
1 ball T45M002
4 bolts M10x35
4 bolts M12x35
4 security bolts 10mm
4 security bolts 12mm
4 washers 40x12x4
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
- 2000 - ....
(*)
(A)
(*)
(A)
(*)
(A)
Publicité
