Plum Stop-ski Mode D'emploi page 21

UTILISATION OF CRAMPONS
The crampons conditions of use are similar to those applied to
a single fixation.
Please refer to the instruction manual of the bindings.
Ski-stopper accessory is compatible with the utilisation of
crampons *
Two scenarios are possible for the installation of crampons on
ski-stopper equipped bindings:
Ski-stopper engaged and the shoe locks in the toe

piece:
The installation procedure crampons is the same as for a non-
ski-stopper binding (see your manual setting).
Ski-stopper « release »

In case of the ski-stopper is in open position, place your
crampons into the slots provided on the binding, applying a
slight push on the treadle to clear the way of crampons.
In a second step, put on the front of the shoe in the toe piece
and lift the lever to "WALK" position.
Finally, press the crampon with the shoe to engage the ski-
stopper.
Before traveling, check for proper engagement of the system.
User Manual
21 | P a g e