Plum Stop-ski Mode D'emploi page 18

Using instructions
LOCK IN
The utilisation of stop-ski accessory does not change the
overall functioning of your binding at all. So please refer to
the binding user manual.
During locking, place the front of the shoe in the toe piece,
ensuring the proper placement of the pins in the boot tip
inserts.
Once the front of the shoe set in the stop, make sure the
lever is placed in "SKI" position.
Apply with forefoot action down, applied on the ski-stopper
treadle until the engagement of the system. A significant
"click" demonstrates a good engagement and the maintaining
in position of arms.
Check the achievement of the locking by releasing the
pressure on the treadle.
Some models of shoe does not guarantee a
complete locking of the ski boot when the heel is
placed in downhill position. To avoid the problem of
incomplete booting, always engage your stop-ski with
the free-heel position.
Ensure before traveling, good locking system.
18 | P a g e
User Manual