Chicco MoDe Mode D'emploi page 18

Mode Booster Seat
GB
Instructions
IMPORTANT: READ THESE INSTRUCTIONS CARE-
FULLY BEFORE FIRST USE TO GUARANTEE YOUR
CHILD'S SAFETY AT ALL TIMES. KEEP THEM FOR FU-
TURE REFERENCE. YOUR CHILD'S SAFETY MAY BE
AT RISK IF YOU DO NOT FOLLOW THESE INSTRUC-
TIONS CAREFULLY.
WARNING: BEFORE FIRST USE, REMOVE AND DIS-
POSE OF ALL PLASTIC BAGS AND PACKAGING MA-
TERIALS AND KEEP THEM OUT OF REACH OF CHIL-
DREN.
WARNINGS
• WARNING: Never leave your child unattended.
• WARNING: Always use the restraint system and
ensure it is correctly fitted.
• WARNING: Always use the chair attachment sys-
tem and ensure it is correctly fitted before use.
• WARNING: Always check the security and the sta-
bility of the chair mounted seat on the adult chair
before use.
• WARNING: Do not use this chair mounted seat on
stools or benches.
• WARNING: This product is intended for children
able to sit up unaided and up to 3 years or a maxi-
mum weight of 15 kg.
• The minimum recommended dimensions of the
adult chair when using this product are: seat width
290 mm; seat depth 320 mm; backrest height 210
mm.
• Ensure that the adult chair with the chair mounted
seat is placed in a position where the child is not
able to use its feet to push against the table or any
other structure as this can cause the tip over of the
adult chair supporting the chair mounted seat.
• Never use the chair mounted seat if some of its
parts are broken, torn or missing.
• Do not use accessories or replacement parts other
than those not approved by the manufacturer.
• Never use the chair mounted seat on broken or
unstable chairs, folding chairs, rocking chairs of
chairs with armrests.
• Do not use the chair mounted seat for more than
one child at a time.
• Before fastening the chair mounted seat to the
chair, always check that the floor and chair seat are
perfectly horizontal; never install the product on
chairs which are positioned on a sloping surface.
• Do not let other children play unattended near the
chair mounted seat.
• Do not install the product on highchairs.
• It is dangerous to use this product on an elevated
surface.
• Do not leave small objects on the chair mounted
seat which the child could swallow.
• Do not use the chair mounted seat on chairs in the
vicinity of curtain cords, windows or heat sources.
• Never use the product as a swimming aid or float-
ing chair in a swimming pool.
• When not in use, the chair mounted seat must be
kept out of the reach of children.
• Do not use the chair mounted seat positioned di-
rectly on the floor.
• Prolonged exposure to direct sunlight may cause
the fabric to fade. After prolonged exposure of the
cot to high temperatures, wait a few minutes be-
fore placing the child into it.
COMPONENTS:
A - Backrest
B - Seat
C - Safety harness straps
D - Rear fastener straps
E - Lower fastener straps
F - Removable activity tray
G - Activity tray connector button
H - Activity tray connector stabilisers
I - Height adjustable legs
J - Height adjuster buttons
K - Backrest release button
L - Height adjuster indicators
TIPS FOR CLEANING AND MAINTENANCE
The cleaning and maintenance operations must only
be carried out by an adult.
Periodically inspect the booster seat for broken, torn
or missing parts: if this is the case, do not use it.
Only use water and a soft damp cloth to clean the
plastic parts of the product
The activity tray is dishwasher proof.
Clean the fabric parts with a soft damp cloth.
INSTALLATION:
1. Undo the lower harness belts (E) as seen in Diag. 1.
2. Release the activity tray (F) from the booster seat
by turning the side handles outwards, as seen in dia-
gram 2;
3. Raise the backrest (A) as seen in Diagram 3A, push
it downwards to lock it in a vertical position, as seen
in diagram 3B; when it is mounted correctly it will
"Click" into place.
4. The booster seat can be adjusted to 3 different
heights; to adjust the seat height, remove the child
from the booster seat, turn the frame over as seen in
diagram 4. Now adjust the legs, sliding them into the
desired position (Diag. 5).
Once the desired height has been selected, check
that the leg (l) has 'clicked' correctly into place. Re-
peat this procedure for the second leg.
To lower the frame, press the button (J) on the side of
the seat, sliding the leg inside the frame (diagram 6)
until you find the right position.
ATTENTION! It is important to check that the legs
are completely level to avoid compromising the sta-
18