Télécharger Imprimer la page

bosal 003-938 Instructions De Montage page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
44 12 03 07/13 / 04.08 / VA
Packing list: 2 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery.
2.
Remove internal edge cover of boot near tail lights
3.
In order to connect both electric bunch to connection socket find two rubber hole plugs in the centre at the back wall
of vehicle. Disassemble them and drill holes inside the them of diameter corresponding with connected bunches.
4.
Connect the cable set in the following way:
a) Draw ends of 2 x 5-input lead bunches in 7-polar set, 5-input and 10-input in 13-polar set with metal lead ends
through the place referred to in point 3 from boot outside (bunch with green lead at the right side) and through a
hole by handle,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Socket is connected according to the following scheme:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
Electrical Set for Trailer Connection
7-pin
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
black/white
2
(54-G)
grey 2 x
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
8
(58-b)
grey/white 2 x
Contact description
Cable colour
1
black/white
2
grey
2a
grey/white
3
brown
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
white/brown 2,5mm
12
13
white/brown 2,5mm
Part no. 003-938
Part no. 008-028
Fiat Bravo/Brava manufactured 95-01
2 Heat shrinkable tube
6 Cable ties
1 Sheet-metal screw
2
2
2
2
10 Quick connector (1x reserve)
11 Quick connector (1x reserve)
in 13 polar set
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
9
7
1
10
6
4
2
3
5
11
12
13
2a
Contact description in
13-pin socket

Publicité

loading

Ce manuel est également adapté pour:

008-028