Télécharger Imprimer la page

bosal WYR230913R Instructions De Montage page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
23 09 13R / 02.04.2019
Packing list:
1 Cable set
1 Socket 13-pin
1 Socket retaining plate
1 Control module
1.
Disconnect the earth lead from the battery
2.
Remove internal boot lining at rear lights to provide easy access. Remove edge cover of boot and spare wheel, if
necessary.
3.
In order to connect electric bunch to connection socket, drill a 6 mm diameter hole in the proper place at the back
wall of vehicle (on the side or below the lock handle). Increase the diameter to 20mm. Secure it with anti-corrosion
remedy. Assembly the rubber grommet into the hole.
4.
Connect the cable set in the following way:
a)
Draw end of lead bunch with metal connections of cables through the place referred to in point 3 from boot
outside and through a hole in connection socket base,
b)
Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c)
Disassemble the socket and connect cables according to the following assignment:
Picture1
Function:
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a)
Pay special attention to the right position of rubber retaining plate,
b)
Put the cable set gently to avoid any folds and to secure it from possible wiping.
6.
Draw end of bunch with grey/red, blue/green and yellow/green leads to right parking lights:
a)
Remove 6-input joint from rear lights and connect with the fitting joint in electric bunch, connect the
remaining joints of electric bundle to rear lights.
Electrical Set for Trailer Connection
230913R
WYR
Part no.:
13-pin
Mercedes A-class manufactured 07.97 - 08.04
1 Rubber grommet
1 Screws M5X10
3 Screws M5X35
4 Nuts M5
Installation instruction
Contact description:
Cable colour:
1
black/white
2
grey
2a
grey/white
3
brown
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
white/brown 2,5mm
12
13
white/brown 2,5mm
4 Spring washer
1 Red lead
1 Sheet-metal screw
8 Cable ties
1 Fuse base
1 Fuse 10A
9
10
11
2
Contact description in
2
13-pin socket
2
2
8
7
1
6
2
4
3
5
12
13
2a

Publicité

loading