Publicité
Les langues disponibles
Les langues disponibles
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery
2.
Remove the covering floor in the boot and remove the rear light covers.
3.
In order to connect the cable set with socket drill the 6mm hole in the floor of the boot (possible opposite to socket
mounting point). Increase the diameter to 20mm. Secure it with anti-corrosion remedy.
4.
Connect the cable set in the following way:
a) Pull the end of cable set with metal terminal and attached rubber grommet through the hole described in point 3
from boot outside to socket mounting point, mount the rubber grommet in the hole,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
.
Not assigned
.
Not assigned
.
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
6.
Bring the end of cable set marked L to the left tail lamp and connect to the fitting connector from cable set:
a) Disconnect 4-way side connector in vehicle and connect to fitting connector from cable set,
b) Connect remaining connector from cable set to left light connector.
Electrical Set for Trailer Connection
Part no.:
011-458
7 -pin
Ford Galaxy manufactured 09.97 - 05.00
Seat Alhambra manufactured 09.97 - 05.00
VW Sharan manufactured 09.97 - 05.00
Part no.:
014-098
13 -pin
Ford Galaxy manufactured 09.97 - 05.00
Seat Alhambra manufactured 09.97 - 05.00
VW Sharan manufactured 09.97 - 05.00
1 Rubber grommet
3 Screw M5 x 35
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
black/white
2
(54-G)
grey
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
8
(58-b)
grey/white
Contact description
Cable colour
1
black/white
grey
2
grey/white
2a
3
brown
4
black/green
grey/red
5
6
black/red
7
grey/black
blue/red
8
red
2,5mm
9
10
11
12
13
rown 2,5mm
3 Nuts M5
5 Cablle ties
1 Sheet - metal screw
.
2
3
8
Contact description in
7-pin socket
9
10
2
11
12
2
Contact description in
13-pin socket
2
1
6
7
5
4
8
7
1
6
4
3
5
13
2a
Publicité
