Ford Transit Bus / Kasten / Pritsche
1986 – 03/2000
Ref. 0709
Fitting instructions
1)
Remove the spare wheel and remove the towing ring at the right bottom side of the car. Remove, at the left side of
the car, the bolts which attach the bumpersupports to the chassis.
2)
Place the tow bar in between the chassis beams so that points (A) fit the free holes. Insert the bolts, washers and
nuts and tighten firmly.
3)
Install the (*) and also tighten firmly.
Put the spare wheel back on its normal place.
4)
Composition
1 tow bar reference 0709
1 flange ball 50T90
2 bolts M16x50
2 bolts M16
2 nuts M16
1 security shackle 50T
6 bolts M12x90
6 safety washers M12
6 nuts M12
6 washers 40x35x12x4
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(A)
(A)
All bolts and nuts : quality 8.8