NEC MultiSync LCD1700M+ Manuel De L'utilisateur page 6

Hardware Installation
–continued
2. Connect the power cord at the back of the monitor to an AC power socket.
Please make sure, that the socket is not blocked or covered, so you can disconnect
the unit from AC supply if you need to. Your monitor is equipped with an auto-
matic power supply for a voltage range from 100 to 240 Volt at a frequency of 50
to 60 Hz. Be sure that your local power is within the supported range. If you are
unsure, ask your electricity supplier.
4
LCD1700M 6 1.2.26, 2:42 PM
Black