Specifications; Multisync ® Lcd1700M - NEC MultiSync LCD1700M+ Manuel De L'utilisateur

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Native Resolution (Pixel Count):
Input Signal
Display Colors
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
Speakers Practical Audio Output
LCD1700M
Black
MultiSync
Monitor
Diagonal: 17.0 inch
17.0 inch
1280x1024
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Analog input: Over 16.7 Million Colors
Horizontal: 31 kHz to 81.1 kHz
Vertical: 56 Hz to 76.6 Hz
720 x 400 @ 70 Hz
640 x 480 @ 60 to 75 Hz
800 x 600 @ 60 to 75 Hz
832 x 624 @ 75 Hz
1024 x 768 @ 60 to 75 Hz
1152 x 870 @ 75 Hz
1280 x 1024 @ 60 to 76 Hz ..................... 60Hz for optimal display performance.
Horizontal: 338 mm/13.3 inches
Vertical: 270 mm/10.6 inches
AC 100 – 240 V, 50-60 Hz
1.2 A @ 100–120 V/0.5 A @ 220–240 V
422 mm (W) x 451 mm (H) x 208 mm (D)
16.6 inches (W) x 17.8 inches (H) x 8.2 inches (D)
7.5 kg
16.5 lbs
5°C to + 35°C
Humidity: 20% to 80%
Feet: 0 to 12,000 Feet
-20°C to +60°C
Humidity: 5% to 85%
Feet: 0 to 40,000 Feet
1.0 W+1.0 W
NOTE: Technical specifications are subject to change without notice.
12
14
® LCD1700M+™ Notes
Active Matrix; Thin Film Transistor (TFT),
Liquid Crystal Display (LCD), 0.264mm
dot pitch; XtraView
white luminance; 350:1 contrast ratio, typical.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
NEC-Mitsubishi Electronics Display cites
recommended resolution at
Dependent upon signal timing used,
and does not include border area.
1.2.26, 2:43 PM
TM Technology; 200cd/m 2 ,