How To Select Tightening Torque - Hitachi DS 14DV Mode D'emploi Et Instructions De Securite

HOW TO SELECT TIGHTENING TORQUE

Cap
position
Approximately 9 in-lbs. (10 kg-cm)
1
Approximately 13 in-lbs. (15 kg-cm)
3
Approximately 26 in-lbs. (30 kg-cm)
7
Approximately 39 in-lbs. (45 kg-cm)
13
Approximately 52 in-lbs. (60 kg-cm)
17
Approximately 65 in-lbs. (75 kg-cm)
22
High speed: approximately 78 in-lbs.
Low speed: approximately 305 in-lbs.
NOTE:
The selected content shown in Table 5 indicates the differences according to screw type,
screw size and material used.
CAUTION:
G
While operating the Cordless driver drill, take care not to lock the motor.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
G
Do not tighten too strongly as the screw heads will be damaged.
Table 5
Tightening torque
(90 kg-cm)
(350 kg-cm)
Operation example
Machine screw tightening
Screw tightening for soft
wood material
Screw tightening for hard
wood material
Thick screw tightening
When used as a drill.
English
19