The Scope And Suggestions For Uses; How To Select Tightening Torque - Hitachi DS 14DMR Instructions De Sécurité Et Mode D'emploi

THE SCOPE AND SUGGESTIONS FOR USES

Work
Wood
Drilling Steel
Aluminum
Small
screw
Screw
tightening
Wood
screw

HOW TO SELECT TIGHTENING TORQUE

Cap
position
1 Approximately 18 in-lbs. (20 kg-cm)
4 Approximately 27 in-lbs. (31 kg-cm)
7 Approximately 37 in-lbs. (43 kg-cm)
10 Approximately 47 in-lbs. (54 kg-cm)
16 Approximately 67 in-lbs. (77 kg-cm)
22 Approximately 87 in-lbs. (100 kg-cm)
High speed: Approximately 106 in-lbs.
Low speed: Approximately 450 in-lbs.
Table 6
Cap position
1 – 22
1 –
Table 7
Tightening torque
(122 kg-cm)(DS14DMR)
Approximately 124 in-lbs.
(143 kg-cm)(DS18DMR)
(550 kg-cm)(DS14DMR)
Approximately 560 in-lbs.
(633 kg-cm)(DS18DMR)
Suggestions
Use for drilling purpose.
Use the bit and socket matching the screw
diameter.
Use after drilling a pilot hole.
English
Operation example
Machine screw
tightening.
Screw tightening for
soft wood material.
Screw tightening for
hard wood material.
Thick screw tightening.
When used as a drill.
27