Publicité
Les langues disponibles
Les langues disponibles
place too long, or scarifying if the ground is wet or too dry can damage the grass.
- To prevent tripping take particular care when moving backwards and when pulling the scarifier.
- Always let the cutting blade rotates at top speed; do not work in such a way as to overload the
machine.
- Never pass the machine over the extension cable while it is running; make sure the cable is always
in a safe position behind your back.
Place the extension cord safely on a path or on an area already scarified.
- When working on inclines always stand diagonally to the incline in a sturdy, safe stance.
Do not work on extremely steep slopes.
- Empty the collection box when it is full in order to prevent the blade becoming clogged and the
motor being overloaded.
5.5- Aeration tips
With the rake (spikes) cylinder, the machine can be used as a lawn aerator for removing grass and
moss in the lawn as well as for cutting flat-rooting ranks.
In order that a healthy lawn can develop in the spring, it is necessary that greater amounts of air
penetrate the area around the roots of the grass.
We recommend aerating the lawn every 4-6 weeks depending on the state of your lawn.
To achieve good result and increase the lifetime of the rake cylinder, mow your lawn to a shorter
height (less than 4 cm) before starting.
Follow above tips in 5.4.
5.6- Working speed
The working speed may vary depending on the geography of the working area (e.g. flat ground,
hilly...), depending on the grass properties (e.g.: thickness, length, humidity ...) and the selected
working height.
It is important to maintain a working speed that allows full control of the machine at all times.
VI. MAINTENANCE AND STORAGE
Before any intervention on the product, make sure that the machine is switched off and
disconnected from its power source.
Any operation, maintenance, adjustment must be carried out with the machine at a standstill.
6.1- Maintenance and Cleaning
a) Have your tool serviced by a qualified person using only identical replacement parts.
This will ensure that the safety of your machine is maintained.
b) Have your machine repaired by a qualified person
Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged part
in an authorised service centre is recommended.
c) Maintain the machine with care.
Keep your machine clean for better and safer performance.
6.2- Intervals
6.2.1- Before each use
- Check the machine for any signs of damage or ageing.
- Check working blades/spikes condition, do not use it if worn out or cracked.
- Make sure all screws and nuts are tight.
- If the machine shows any defect, seek assistance from a certified service center for repair if
necessary.
6.2.2- After each use
- Same as 6.1.1
- Clean the machine of all debris and dirt.
- Store machine (see 6.6)
Publicité
