Curling Tong - Unold 87475 Notice D'utilisation

CURLING TONG

The curling tong is ideal for shaping tight curls.
Caution: There is danger of burn injuries if there is skin contact, conse-
quently handle the curling tong very carefully!
Caution: In the "Hold" function (holding of the preset temperature) the appli-
ance can no longer be switched off via the ON/OFF button. Never leave the
appliance unattended if it is in this function mode, because there is danger
of burn injuries!
Please note that the results can vary greatly due to the different hair structures
of each person. To prevent damage to your hair, select a temperature that is
suitable for your hair, ensure that you do not style coloured or damage hair at
excessively hot temperatures.
1. Prepare your hair as described in
the chapter, "Prior to use".
2. Check whether
brush has been fitted onto the
appliance. If yes, please remove
it, as described in the chapter,
"Round ring".
3. Unlock the curling tong on the
handle of the appliance. To do
this, turn the rotary regulator on
the handle to the right.
4. Now if you press the lever the
bracket of the hair tong opens.
5. Plug the plug into an electrical
outlet (220 V~, 50/60 Hz).
6. Switch on the appliance via the
ON/OFF button (keep the button
depressed for several seconds).
7. The display is illuminated blue
and shows 80°C.
8. Select the desired temperature
via the temperature
The temperature can be selected
between 80
increments of 10. You have the
possibility of precisely setting the
temperature via the Lower and
Higher buttons.
9. During the heat up time, an
eight-part segment appears in the
display, which rotates clockwise.
As soon as the appliance has
reached the desired temperature,
the segment no longer rotates.
24
the round
buttons.
and 200°C in
Copyright UNOLD AG | www.unold.de
10. Note: Starting at 140°C the blue
display illumination changes to
red illumination.
11. To avoid undesired temperature
adjustment,
the temperature via the "Hold"
button. To do this, select the
desired temperature as described
above. Then press the "Hold"
button for some time until the
display returns to 80°C. Now the
appliance heats up to the pre-
set temperature and holds this
temperature. Now it is no longer
possible to adjust the temperature.
Likewise the appliance can no
longer be switched off via the
ON/OFF button. If you want to
deactivate this function, press
the "Hold" button again for some
time.
12. To achieve an optimal styling
result, wait until the appliance
has heated up to the desired
temperature. As soon as the eight-
part segment stops the appliance
is ready for use.
13. When you set the appliance down
to the side during the heat up
phase, only place it on the set-
down bracket.
14. Divide the combed hair into small
strands that should not be wider
than five centimetres. If necessary
you can pre-set