Denon DJ MC7000 Guide D'utilisation Rapide page 3

Setup
Important: Occasionally, we may update MC7000's firmware to improve its performance. Visit
denondj.com to check for available firmware updates, especially after you update your
software (firmware updates may address new software features).
Note: Items not listed under the
Single-DJ Performance
1. Visit denondj.com
DJ product.)
2. In your account, download and install the latest version of Serato DJ.
3. Windows users only: In your account, download and install the latest Windows driver.
4. Connect input sources (microphones, CD players, etc.) to MC7000.
5. Connect output devices (headphones, power amplifiers, loudspeakers, etc.) to MC7000.
6. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) MC7000, (3) output devices.
• When ending a session, turn off (1) output devices, (2) MC7000, (3) input sources.
7. Using a standard USB cable (included), connect the USB port on MC7000 to your
computer. Open Serato DJ and go! For more information on how to use Serato DJ with
MC7000, visit serato.com/dj/support
Computer
Power
Introduction
and log into your account. (Create an account if this is your first Denon
Microphone
Smartphone, Headphones
tablet, etc. (to front panel)
Box Contents
and select Denon DJ MC7000.
House Loudspeakers
are sold separately.
Booth Monitors
3