Zi-Hs22Ez Und Zi-Hs30(E)Z - Zipper Maschinen ZI-HS16E Manuel D'utilisation

15.2

ZI-HS22EZ und ZI-HS30(E)Z

The 3-point attachment to the tractor makes the log splitter easy to move. Before transport, make
sure that the log splitter is correctly and securely attached to the tractor and that the safety chains
are in place. Make sure that the splitter is raised high enough to avoid obstacles during transport.
Never transport the log splitter when the PTO shaft switched on! In driving situations, e.g. when
turning, parking or passing crossings, take into account the excess length caused by the attached
log splitter.
ZIPPER MASCHINEN GmbH
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
www.Zipper-Maschinen.at
B. Fold out the transport handle: The transport
handle is normally fixed in an upright position. To
transport the log splitter, the transport handle must
be folded out as shown in the illustration on the left.
To unfold, release the pin (1), unfold the transport
handle (2) and fix it in the unfolded position using
the pin (3).
N O T I C E
 When using a crane for lifting, attach the crane
hook only to the intended lifting point (a) - see
illustration on the left.
 Never attach the crane hook to the transport
handle (b)!
 Before moving the log splitter, make sure that the
cover on the oil tank is firmly closed!
 To move the log splitter, grasp the transport
handle (b) and carefully tilt it back!
A. Positioning the transport wheel: Pull out the
lock pin, turn down the support wheel to the
transporting position.
TRANSPORT
40